List of Injection Mold Manufacturers in India: Our Top 7 Picks

Posted on 2 Comments

Injection Mold Manufacturers in India

Looking for a qualified injection molding supplier in India? In this article, we list our top 7 picks of the leading injection mold manufacturers and molding machine providers; we compare their products, services, certificates, and other key factors.

List of Injection Mold Manufacturers in Vietnam

At what stage of the manufacturing process shall I buy the mold?

A mold is necessary as early as the product development stage, as you will need a mold even during sample production.

Nevertheless, if you are satisfied with the samples, you can reuse the mold for your bulk production.

Primex Plastics Pvt.Ltd.

Founded in 1991, Primex Plastics is an injection molding supplier that provides different solutions for injection molding, especially plastic molds.

Today, the company has 13 injection molding machines, and a 25,000 square meters factory in Bangalore.

Primex Plastic specializes in plastic products; therefore, they focus on supporting clients for plastic-based molds, such as household appliances, consumer electronics, power tools, automotive dashboards, and daily supplies.

Products and Services

  • Plastic injection molds
  • Insert molding
  • Hot runner molds
  • Thermoplastic resins
  • Thermoset resins


  • ISO 9002
  • ISO 9001: 2000
  • ISO/TS 16949
  • ISO/TS 16949: 2009

Location: 48/1, 8th Main, 1st cross, SLV Industrial Estate, Kariobanahalli, 2nd Stage, Peenya Industrial Area Phase IV, Peenya, Bengaluru, Karnataka 560058, India.


Established in 1997, AF Technologies India Pvt. Ltd. was founded as a 50-50 joint venture by a North American company, MIM, and an Indo-American industrialist.

In 2001, it became a 100% local injection molding company, and changed its name to Indo-MIM.

Indo-MIM offers two types of injection molding, ceramic and metal injection molding.

Ceramic injection molding increases productivity and lowers manufacturing costs, when using innovative injection techniques that mix fine ceramic powder with a polymer binder, and complete the process via densified sintering.

Metal injection molding combines both plastic injection molding shape making and material flexibility of metal.

Having said that, metal injection molding is much more complicated than plastic injection molding; as a result, some of the injection molding companies do not offer metal injection molding.

In additional, Indo-MIM is certificated for IATF 16949 2016, which is the main QMS standard for the global automotive supplier base. They also own several certifications, you may check the list as below.

Products and Services

  • Metal injection molding
  • Ceramic injection molding


  • AS 9001:2016
  • IATF 16949:2016
  • ISO 13485:2016
  • ISO 9001:2015
  • ISO Class 8
  • ISO 14001:2015

Location: No 45, (P) KIADB Industrial Area, Hoskote, Bangalore 562114, India.

Think 3D

Think 3D was founded in 2014 by Prudhvi Reddy and Raja Sekhar Upputuri. The company aims at fulfilling the client’s manufacturing needs through 3D printing, CNC machining, vacuum casting, and injection molding.

Even though the traditional horizontal injection molding machine is reliable, power-efficient, and consistent; it may occupy more floor space and it is mostly applicable to big size products.

Therefore, Think 3D prefers to use innovative technology such as vertical injection molding and desktop injection molding machines.

Vertical injection molding machines are primarily to products that contain two pieces utilizing the concept of over-molding or insert molding.

Moreover, they can save floor space, which means the factory can install more machines to increase productivity.

Desktop injection molding machines allow molten resins to be injected into a small, closed and cooled mold; thus, it is indicated for small plastic products.

Think 3D located its head office in Andhra Pradesh, and set up its branch offices all over the country, in New Delhi, Telangana, Maharashtra, and Palakkad District.

Products and Services

  • Mold design
  • Manufacture both regular and small plastic molds


  • ISO 9001:2015
  • BIS certification (Bureau of Indian Standards)

Location: AP MedTech Zone Campus, VM Steel Project S.O. Vizag, Andhra Pradesh, 530031, India.

Micro Plastic

Founded in 2005 by Vijendra Babu.N, Micro Plastic is an ISO certified injection molding supplier, and a manufacturing exporter in the US, UK, Europe & Asian markets. The company is specialized in plastic material products.

They started with only 3 injection molding machines in 2005, and now they have 125 injection molding machines that operate in a total of 37,000 square meter manufacturing space in Bangalore.

Their engineering division is equipped with some large plastic injection molding machines and an in-house tool room. This allows the company to manufacture or maintain a mold up to one metric ton on size.

Products and Services

  • Mold design
  • Plastic injection molding


  • ISO 9001:2000
  • ISO TS 16949
  • ISO 14001

Location: Plot N. 318-G, 2nd Phase, KIADB Industrial Area, Harohalli, Kanakapura Taluk, Ramanagara District, Karnataka, 562112, India.

Vikas Industry

Vikas Industry was established in 1967. Their head office is in Mumbai, while their three manufacturing factories are located in Thane and Pune.

With 52 years of experience, Vikas Industry is one of the leading injection molding suppliers in India; the company offers its services and products to global brands such as OTIS, Sharp, Ford, and others.

In addition, the company offers gas injection molding by using N2 gas. This technique can reduce material requirements, minimize scratch on molds, and improve component quality.

Currently, Vikas Industry owns 20 injection molding machines and offers a variety of molding services, below you can find a few examples.

Products and Services

  • Plastic injection molding
  • Gas injection molding
  • Molds manufacturing
  • Injection molding techniques development


  • ISO 9001:2015
  • ISO 14001:2015
  • OHSAS 18001:2007

Location: B-1, Girikunj Industrial Estate, Off Mahakali Caves Road, Andheri (East), Mumbai, Maharashtra, 400093, India.


Established in 2004 by two Indian enterprises, Rajalingam and Ravi. Their head office and factory are located in Bangalore, the center of India’s high-tech industry.

Kruger offers a full cycle of molding services: product design, prototyping sample, molds design, injection molding, and plastic optimizations.

Their injection molding division is equipped with a variety of high precision conventional injection molding machines to manufacture a wide range of products.

Products and Services

  • Molds design
  • Injection molding
  • Plastic optimizations

Location: 42, E1-E4, 2nd Main, 2nd Phase, Peenya Industrial Area, Bengaluru, Karnataka, 560058, India.


Established in 1979, Hikon started its business in India. Now the company is one of the leading injection molding machine providers, and it complies with ISO 9001:2008 certification.

Hikon is dedicated to the plastic extrusion industry, it provides engineering solutions for plastic injection molding machines, recycling units, and machine supplementary.

Their injection molding machines incorporate an efficient and sound reduced hydraulic pump that allows the machines to be more energy-efficient and quiet.

Further, each machine has a mold height adjustment for saving both time and cost during the mold changing process.

Products and Services

  • Injection molding machine
  • Plastic shredding machine
  • Plastic reprocessing services


  • ISO 9001:2008

Location: 3/23 Kirti Nagar, Industrial Area, New Delhi, 110015, India.

  • Free Webinar

    Free Consultation (30 Min): Ask Questions About the Importing Process

    • 1. Product design and material selection
    • 2. Finding suppliers in Asia
    • 3. Product samples and payments
    • 4. Quality control, lab testing & shipping


  • 2 Responses to “List of Injection Mold Manufacturers in India: Our Top 7 Picks

    1. Michael Schneider at 12:35 pm

      I am looking for a 5 axis machining company in India to make steel cnc blocks for hot stamping tools! we have used injecting mold companies in other regions due to the tool surface machining accuracy! And the tool surface quality! we are looking to localize this type of machining in India. Let me know if you can direct me to a supplier to contact and any help is appreciated.

      Michael Schneider

    2. vikas at 6:16 pm

      New Mould Requierment,

    Leave a Reply

    Your email address will not be published.