List of Face Mask Manufacturers in Vietnam: Our Top 6 Picks

Posted on 23 Comments

Face Mask Manufacturers in Vietnam

Planning to import face masks from Vietnam but can’t find the right manufacturer? In this guide, we list Vietnam-based face mask suppliers producing various types of medical and other protective masks. Each company listing includes an introduction, main product overview, certification, and location.

Listed Companies

  • Peace Age Medical Equipment Co., Ltd.
  • Kim Sora Limited Liability Company
  • Vina Mask International Co., Ltd
  • Danameco JSC
  • Jangjung Vina Co., Ltd.
  • Tay Saigon Equipment Co., Ltd.

Buyer’s Guide

  • FFP1
  • FFP2
  • FFP3
  • N95
  • N99
  • N100
  • K90
  • KN95
  • KN100
  • Surgical Masks (3-Ply/4-Ply/5-Ply)


We have selected the suppliers in this list based on their product scope and claimed certification. We don’t endorse any of the suppliers in this list, nor are we affiliated with them. We provide this supplier list as a free resource.


Scams: Beware of scams involving medical products. The risk of payment fraud and delivery of non-compliant and/or inferior products is high at this time.

Export Bans: Some countries, including Vietnam, enforce export bans on certain products. Export bans enforced after you have placed an order can result in a total loss – or severe delay.

Before you order

Here are our recommendations for importers planning to order medical products.


It’s currently a seller’s market for many medical products, with more demand than supply. Expect higher unit prices for more products.


The Minimum Order Quantities (MOQ) requirements are also higher than normal. Some suppliers don’t accept orders valued less than USD 100,000.

Payment Terms

Some suppliers may insist on a 100% pre-payment, before starting production. We still advise that you only pay a 30% deposit and 70% balance after quality inspection and lab testing – or, pay by Letter of Credit.

Product Compliance

Medical devices and equipment are regulated in the United States and the European Union. Such regulations are there for a reason – to ensure that the product is not worthless (which is a risk) – and will not go away due to the current COVID-19 outbreak. You must request and verify test reports and other compliance documents (e.g. DoC) before placing an order.

Peace Age Medical Equipment Co., Ltd.

Peace Age Medical Equipment was established in 2000 in Ho Chi Minh City. The company produces disposable sanitary items such as masks, coveralls, suits, gowns, blouses, caps, and shoe covers for medical, household, commercial and industrial purposes.

The company has an ISO 9001 and an ISO 13485 quality management system certificate and according to the website information, they conform to the medical manufacturing regulations in Vietnam.

Peace Age’s products are purchased by various organizations and businesses including hospitals, healthcare units, pharmaceutical companies, garment manufacturers, and cosmetic distributors.

Main Products

  • Sterilized face masks
  • BFE 99.9% medical masks
  • Dustproof carbon masks
  • Children’s masks


  • FDA
  • ISO 9001
  • ISO13485

Company Information

  • Year of Registration: 2000
  • Location: Ho Chi Minh City, Vietnam

Location: 159/13 Pham The Hien Street, Ward 3, District 8, Ho Chi Minh City, Vietnam

Kim Sora Limited Liability Company

Kim Sora Limited Liability Company was established in 2015 in Da Nang, Vietnam, as a medical face mask and garment manufacturer, mainly targeting its market in Japan.

Currently, there are more than 500 skillful workers in Kim Sora and most of them speak both English and Japanese, which makes the transactional environment easier for oversea buyers. Furthermore, Kim Sora claims to manufacture its products conforming to Japanese Standard DS-2 for medical and dustproof masks. In addition, the company is ISO 9001 certified.

Main Products

  • Medical mask of different colors
  • Carbon masks
  • Nonwoven children’s masks


  • Medical Devices Directive
  • ISO 13485
  • ISO 9001

Company Information

  • Year of Registration: 2015
  • Location: Da Nang, Vietnam

Location: Street No. 3, Hoa Khanh Industrial Park, Hoa Khanh Bac Ward, Lien Chieu District, Da Nang City, Vietnam

Vina Mask International Co., Ltd

Vina Mask International is a Japanese company that was founded in 2017, with the manufacturing center located in Vietnam, and specialize in producing nonwoven disposable masks for multi-purposes.

Vina offers multi-layer surgical masks, children’s masks, and UV protection masks.

Main Products

  • Multi-layer surgical masks (2, 3, 4 ply)
  • Children’s masks
  • UV protection masks
  • 3D masks
  • Carbon masks


  • ISO 13485

Company Information

  • Year of Registration: 2017
  • Location: Da Nang, Vietnam

Location: 7th Street, Hoa Khanh Industrial Zone, Hoa Khanh Bac Ward, Lien Chieu District, Da Nang, Vietnam

Danameco Medical JSC

Danameco Medical JSC was established in 1976, as a manufacturer and distributor of medical supplies, such as multi-layer surgical masks, anesthesia masks, O2 masks, bandages, coveralls, medical cotton, and special medical kits. In 2010, the company listed shares on the Hanoi Stock Exchange with the stock code DNM.

Danameco‘s website information shows that the company conforms to the requirements of several international safety standards. For example, according to the company, all medical products from Danameco are sterilized by EOGas and use eco-friendly packaging.

Up until 2020, Danameco has been certified ISO 9001 and ISO 13485 and its products were distributed to 63 provinces and cities in Vietnam, with some large purchases from prestigious customers like Cho Ray Hospital, Thong Nhat Hospital, No.1 Children’s Hospital and Bach Mai Hospital in Vietnam.

Other than that, the company exports its products to the US, Japan, and Korea.

Main Products

  • Multi-layer surgical masks
  • Anesthesia masks
  • O2 masks


  • ISO 10012
  • ISO 14001
  • ISO 14971
  • ISO 19001

Company Information

  • Year of Registration: 1976
  • Location: Da Nang, Vietnam

Location: 12 Trinh Cong Son Street, Hoa Cuong Nam Ward, Hai Chau District, Da Nang, Vietnam

Jangjung Vina Co., Ltd.

Jangjung was established in 1992 in South Korea, as a sanitary supplies producer. Currently, the company has two manufacturing centers in Vietnam, one in Ho Chi Minh City and the other one in Hanoi, under the company Jangjung Vina.

They produce surgical masks, dustproof masks, gowns, drapes, and wipers.

Jangjung’s main exporting markets are Japan and South Korea. Based on the information from Jangjung’s official website, they have received some large quantity purchases by Samsung, LG, Panasonic, Canon, and Hyundai.

Main Products

  • Surgical masks
  • Dustproof masks


  • ISO 9001
  • ISO 14001

Company Information

  • Year of Registration: 1992
  • Location: Da Nang, Vietnam

Location: 7th Street, Hoa Khanh Industrial Zone, Hoa Khanh Bac Ward, Lien Chieu District, Da Nang, Vietnam

Tay Saigon Equipment Co., Ltd.

Tay Saigon Equipment was established in 2013 in Ho Chi Minh City. The company is a professional disposable mask manufacturer, which has launched its own brand, Hero Mask. Further, Tay Saigon offers multi-layers disposable masks for sanitary purposes.

Tay Saigon Equipment has developed a special product for sun protection purposes, the ninja mask, which covers a large proportion of the face, from forehead to chin. It is designed to be used in tropical or severe cold regions, to protect the users from the scorching sun or piercing wind.

Main Products

  • Multi-layer surgical masks (3, 4, 5 layers)
  • Carbon masks
  • Full face ninja masks


  • ISO 9001

Company Information

  • Year of Registration: 2013
  • Location: Ho Chi Minh City, Vietnam

Location: 265, Road No. 1, Binh Tri Dong B Ward, Binh Tan District, Ho Chi Minh City, Vietnam

Face Mask Buyer’s Guide

Face masks can either be considered as personal protective equipment, when they mainly protect the wearer, medical masks, when they mainly protect the patient, or both, when they are designed to protect both the wearer and the patient in a medical environment.

Note that the US, EU, China, and other countries, classify masks also according to filtration capability.

FFP1 Face Masks (EU)

The standard EN 149 sets up requirements and standards for the manufacturing and marketing of respiratory protective devices in the EU. This standard defines the respirators as filtering facepieces and classifies them into three categories: FFP1, FFP2, FFP3, based on the particle-filtering efficiency of the masks.

The higher the number is, the more protective a mask can be to the users in terms of its particle-filtering efficiency. Note that the standard is harmonized under the PPE Directive.

FFP1 masks have the weakest efficacy in particle filtration, compared to FFP2 and FFP3. FFP1 masks are generally used as dust-proof masks, in particular dust that has bigger diameters from coal, silica, iron ore, zinc, aluminum, and cement. FFP1 masks are suitable to be used for the purpose of DIY jobs, home renovations, cleaning, and drilling.

For FFP1 type masks, filtration ability is supposed to be at least 80% while leakage is supposed to not exceed 22%.

FFP1 masks are often distinguished by yellow elastic bands.

FFP2 Face Masks (EU)

FFP2 masks’ particle filtration capability is stronger than FFP1 masks but not as effective as FFP3 masks. FFP2 masks shall provide a minimum of 94% filtration rate and a maximum of 8% leakage to the inside.

FFP2 masks are effective against particles like cotton dust, granite dust, hay, lead dust, and fume and can block off fine particles from influenza viruses such as avian influenza, SARS, pneumonic plague and tuberculosis.

Some FFP2 masks are equipped with one or more valves, of which the function is to adjust the temperature inside the masks and prevent overheating of the filter elements.

FFP2 masks are often distinguished by white or blue elastic bands.

FFP3 Face Masks (EU)

FFP3 masks have the strongest capacities in particle filtration compared to FFP1 and FFP2 masks.

FFP3 masks can filter at least 99% particles of which the diameter is smaller than 0.001 microns, with the inward leakage being a maximum of 2%. FFP3 masks are able to block very fine particles such as asbestos and ceramics.

This kind of mask is suitable to be used for medical, pharmaceutical and chemical purposes. However, given the excellent capacity in filtering particles, users might find themselves hard to breathe when wearing FFP3 masks. Users with cardiac or respiratory issues should carefully choose the right kind of FFP3 masks.

FFP3 masks are often distinguished by red elastic bands.

N95 Face Masks (USA)

The American National Institute for Occupational Safety and Health (NIOSH) classified the respirators into N, R and P series and 3 rating systems, 95, 99 and 100 in 42 CFR Part 84.

The degree of filtration ability is indicated by progressive numbers, each of which represents the filtration ability in percentage. N-series masks are not able to filter particles with oil, R-series masks are able to block off particles that contain oil, effective for at most 8 hours, P-series masks are oil-proof. The bigger the number is, the more effective it is in capturing and filtering particles and providing a higher level of protection to the users.

The filtration capability of N95 masks is 1% superior to FFP2 masks, with a minimum of 95% filtration rate of particles larger than 0.3 microns in diameter.

N95 masks can filter particles like coal, iron ore, flour, metal, wood and pollen, and other non-oil based liquids and are the most well-known and popular models among the public, for its ability in protecting the users against flu, swine flu, avian flu transmission, and air pollution.

N99 Face Masks (USA)

N99 filters up to 99% of the particles that are larger than 0.3 microns in diameter, such as asbestos, bacteria, copier toner. N99 masks are made denser than N95 in order to trap down more particles, which as a result makes the N99 more expensive and harder for the users to breathe when wearing it.

Therefore, as for FFP3 masks, users must be cautious if they have cardiac or respiratory issues.

N100 Face Masks (USA)

N100 masks can filter up to 99.97% of the particles that are larger than 0.3 microns in diameter and therefore rank the highest in terms of particle filtration efficacy among the N-series masks.

N100 masks’ excellent particle filtration capacity makes them suitable to be worn in the fields of chemical engineering, pharmaceutical, constructional or venues where hazardous gases or particles spread, such as grinding, sanding, mineral processing and other activities.

N100 masks are able to prevent the inhaling of substances like lead, cadmium, or arsenic, and protect the users from airborne hazards like avian flu, swine flu, and other contagious diseases.

KN90 Face Masks (China)

China has set up its national standards for respirators, codified in GB2626, enacted by the State Administration of Quality Supervision of China, which specifies the requirements for material, structure, appearance, performance, filtration efficiency and labeling for respirators.

The classification system is similar to the American standard, featuring KN-series and KP-series, followed by number 90, 95 and 100. KN-series masks are not able to filter particles with oil while KP-series masks are oil-proof. The higher the number is, the more capable a mask in filtering particles.

KN-series masks are proven to be effective in blocking particles of which the diameter is less than 5 microns. The filtration rate of KN90 masks is at least 90%.

KN95 Face Masks (China)

KN95 masks can at least filter 95% particles for the users and are among the most popular and well-known among the public for using them to protect themselves against bacteria, viruses, or air pollution.

KN100 Face Masks (China)

KN100 masks are supposed to filter at least 99.97% of particles. As usual, this high filtration ability might be problematic for users who have cardiac or respiratory issues.

Surgical Masks (3-Ply/4-Ply/5-Ply)

Surgical masks were originally designed to protect doctors and patients from bacteria and viruses that could be transmitted through droplets and fluids. Now, surgical masks have stretched their applications and are extensively used for various purposes, protecting the users from inhaling dust, pollen and other types of particles.

Typically, there are 3-ply, 4-ply and 5-ply surgical masks available in the market. The general structure of a 3-ply includes an outer layer to repel fluids, a middle layer to filter bacteria, and an inner layer that shall mainly absorb fluids.

4-ply and 5-ply masks have extra layers to offer extra protection.

United States

US FDA regulation 21 CFR Section 878.4040 categorizes surgical masks as Class II medical devices and provides regulatory standards for them.

Two key standards to consider when dealing with FDA compliance are ASTM F2100, which specifies how to test bacterial filtration efficiency, and ASTM F1215, which indicates how to evaluate particle filtration efficiency.

Based on the results of these tests, a compliant mask has an efficiency level of 1, 2, or 3.

Level 1 masks filter out 95% or more of bacteria and sub-micron particulates, while level 2 or 3 masks remove at least 98%.

European Union

Surgical masks must comply with the requirements set out in the EU’s Medical Devices Directive, including the harmonized standard EN 14683, which is similar to the ASTM standards mentioned above.

Under standard EN 14683, a mask receives a rating of Type I, Type II, or Type IIR according to its effectiveness blocking bacteria and sub-micron particulates.

Whereas Type I masks need only filter out at least 95%, Type II and Type IIR masks must filter out 98% or more.


China established the standard for surgical masks under the resolution YY0469, which requires surgical masks to filter at least 95% of particles.

  • Free Webinar

    We can help you manufacture products in China, Vietnam & India?

    • 1. Product design and material selection
    • 2. Finding suppliers in Asia
    • 3. Product samples and payments
    • 4. Quality control, lab testing & shipping


  • 23 Responses to “List of Face Mask Manufacturers in Vietnam: Our Top 6 Picks

    1. Berton at 2:40 pm

      We provide face mask test equipment, PFE tester, BFE tester, Delta P, blood tester, etc.
      Hope to provide our product to your mask factory. whatsapp:86 17682399095

    2. Tran Hai Linh at 4:57 pm

      Hi everyone!

      We are from Vietnam. We supply 3-4 ply face mask, KN95, D95, cloth mask and other PPE protect from Covid-19.

      Plz contact me Whatsapp number: +84943094213

      1. Vince at 9:41 am

        We are from Southern California, USA and we are currently looking for more suppliers of cloth face masks and other PPEs for reselling to frontline workers and medical professionals across North America. Do you have local suppliers here wherein we can buy? Pls. provide their contact info.

        1. Philip at 4:08 am

          Yes, I can supply for you. Please contact me

      2. Fatima at 1:11 pm

        Hi I am
        Interested in your mask
        I am a distributor in canada and would like to sell
        Mask can u send me send samples on site so I can see looking for three layers luxury looking and any silk masks

    3. April at 2:00 am

      Hi does the abovementioned manufacturers export to USA with proper certification? I’m looking for a PPE manufacturer I can partner with that also do customised packaging? I’m a small time business owner and I want to supply small businesses / retail. Can someone point me to the right direction? thanks!

    4. Pradeep Rajaram at 1:15 pm

      We are in need of Community masks which is washable and satisfy the below mentioned requirements.

      The masks have to support at least 5 cycles of washing machine (1 cycle is one washing temperature at 60°C + normal tumbling dry), and:

      The penetration of the mask monolayer or multilayer composite must have a filtration capacity of at least 70% for solid particles or for liquid particles with a size of 3 μm.

      Air permeability: Pressure difference is less than 70 Pa/cm².

      The packaging materials must meet the REACH 1907/2006 requirements and must be harmless to the skin, mucous membranes and lungs.

      Pl suggest the appropriate masks manufacturer with best price, delivery lead time for 6 million pieces…..
      If ready stock will take it immediately.
      Pls contact

      Mr.Pradeep Rajaram

    5. Anronio Ferreira at 7:28 am

      Please contact me.

    6. Sam at 5:09 pm

      Hello from Viet Nam. I would like to supply 3 & 4 ply medical mask . Our products have registered for FDA, CE certification.

      1. An at 6:23 am

        What company in vietnam supplies surgical masks that are fda/CE and iso certified?

        1. Beka at 8:45 pm

          Hi, An. I have a factory that can meet those demands. Can you send me your contact information?

        2. Dan at 12:59 pm

          Hi An,

          Please send your contact information.

    7. ALLEN PEARSON at 10:43 pm

      I’m looking for a supplier to supply level 3 surgical masks as well as N95 and KN95 FDA CE NIOSH masks.

    8. Nasir Baig at 7:56 pm


      I am looking for reliable partners who can help me to supply real sterile 3ply surgical face masks BFE & PFE 99 % (minimum 98%) to USA /New York.

      I am helping my client (Fed Gov) to find a professional supplier for 100 Million masks for the first order. The factory/factories will supply at maximum capacity in a period of one month. If we are able to provide masks with FDA,CE, ISO certificate with product code FXX listed in the FDA then client will reward us 1 billion mask contract on the following order.

      If possible what price can you quote us for your maximum capacity delivery? And, If delivery at 100 million? We can work with minimum supply at 10 million if the factory is not able to supply large quantities or work with 2-3 factories to be able to supply 100 million.

      Is it something you can help us with? Thanks.

      1. Tim Gan at 1:46 am

        Hi, we have direct access to many mask manufacturers since we supply the raw materials that they need to make the end product that you seek. How can we contact you?

      2. Fredrik Gronkvist at 4:32 pm

        I doubt you will find a supplier with that capacity right now

      3. Abdul Malik Azman at 8:27 pm


        Please you phone number, please.

      4. Tran Hai Linh at 6:22 pm

        Hi Nasir Baig,

        We from Vietnam, can meet your requirement. Plz contact me via Whatsapp: +84943094213

    9. Vijaykumar Sharma at 10:04 pm

      Looking for’3M’Branded N95MASKS ffp2 and FFP3 masks

      1. Fredrik Gronkvist at 6:42 pm

        I don’t think you can buy branded 3M from suppliers in Vietnam

        1. Lee at 6:49 pm

          You are correct. 3M says you have to order their masks from their channels in the country you wish to use them in. Cannot ship them from outside the country. I’m would be weary of those saying they can.

    10. Ramazan at 11:08 pm

      I look for medical mask for corona virus. different type mask

    Comments are closed.

    FREE WEBINAR: How to Import Products from

    China & Vietnam in 4 steps

    Finding the Right Supplier on Alibaba, Product Samples, Common Scams, Quality Control & More 


    You can ask questions during the presentation!